The JDS Uniphase Multichannel Back reflection Meter performs a wide range of single-mode or multimode return loss (RL) and loss measurement functions, ranging from single component testing to automated multifiber testing. The primary functions of high sensitivity RL measurements and power measurements can be augmented by the addition of multiple output ports and multiple internal light sources.
The meter is with 4 output ports. A multidisplay mode lets the viewer see multiple test results at a glance. The meter is used for single fiber and ribbon fiber connector measurements. Use of hybrid jumpers allows a quick change of the connector type without limiting the RL range. The meter is
also available with 2 internal sources for measurements at 1310, and 1550 nm. The 2 mm InGaAs detector is particularly useful for high sensitivity single fiber applications. One MTP/MPO detector adapter is supplied with the unit, and other adapters are also available for purchase from the vendor.
The Multiple Connector Test System (MCTS) software automates insertion loss and RL measurements of optical connectors. It also provides the ability to print labels, manage data, define pass/fail testing criteria, identify the device under test, and set up multiple channel measurements, all of which increase testing productivity.
This meter model RX3074-2I is equivalent of model RX33070+1041FA7
Programmable via MCTS application software
· Complies to FDA 21CFR 1040.10 for Class I Lasers
· Remote interface GPIB and RS-232